Category 5e UTP modules are standard 25x50mm Euromod size. Each shuttered module is supplied with an ID window and label.
The module is cased in a high quality ABS plastic and is suitable for mounting in a variety of plates and housings due to its low profile design.
Features
Standard 25x50mm Euromod Size
Low Profile Design
Supports Gigabit Ethernet
Suitable for 22-26AWG stranded and solid wire, compatible with Krone punch down tool
The Cat5e transmission performance is in compliance with the ANSI/TIA/EIA 568 B.2 Standard
Please Note: These modules are designed to fit only into CE Faceplates found Here
A Single Gang Faceplate complete with one CE cat5e Data Module, centralised in the faceplate using blanks to enable future upgradeability to a doulble outlet. Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.
Cat6 UTP RJ45 1 in 1 Module/Faceplate
A Single Gang Faceplate complete with one Data Module, centralised in the faceplate using blanks to enable future upgradeability to a double outlet. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design..
Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon
Module Features
Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Power Sum Compliant
Backward Compatible
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position
Performance Overview
Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications.
As well as providing link and channel compliance - when installed with Excel category 6 components - with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.
Accessories
(Sold Separately)
Cat6 Patch Leads
IDC Punchdown Tool
Cat6 Solid Cable
Cat6 Modules
A Single Gang Faceplate complete with one CE cat6 Data Module, centralised in the faceplate using blanks to enable future upgradeability to a doulble outlet. Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.
UTP RJ45 Cat5e Low Profile Shuttered Module
Excel Category 5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress.
Please Note: These modules are designed to fit only into Excel Faceplates found Here
Features
Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Low profile Design
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position
Performance Overview
Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications
The Excel 3 in 1 module offers the ultimate in flexibility, space utilisation and ease of installation. The totally modular design allows the mounting of up to 3 shuttered RJ45 ports in a standard flat or bevelled single gang faceplate or up to 6 in a double gang fascia. The unique design means that you only load shuttered outlets as required, any capacity within the plate which is required for a later date is simply blanked off, providing a neat and easy to use completed installation. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.
Features
Category 5e compliant
High density design
Individual snap in modules
Fit standard Excel Faceplates (3 required for Single Faceplates, 6 required for Double Faceplates)
LSA compatible IDC
Individual port slide labelling system
Module dimensions 16.6(w) x 50(h) x 31.5(d) mm
Please Note: These modules are designed to fit only into Excel Faceplates found Here
Performance Overview
Excel Category 5e 3 in 1 modules are manufactured and tested to the current Category 5 enhanced standards as defined by the EIA/TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications.
Pre-assembled faceplates can be ordered to save installation time.
Category 5e UTP modules are standard 6C size. Each shuttered module is supplied with an ID window and label.
The module is cased in a high quality ABS plastic and is suitable for mounting in a variety of plates and housings. The low profile design and its 6C size make this item ideal for floor box installations.
Features
Standard Euromod Size
Low Profile Design
Supports Gigabit Ethernet
Suitable for 22-26AWG stranded and solid wire, compatible with Krone punch down tool
The Cat5e transmission performance is in compliance with the ANSI/TIA/EIA 568 B.2 Standard
Single Gang Faceplate complete with two CE cat5e Data Modules, Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.
Single Gang Faceplate complete with two CE cat6 Data Modules, Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.
A Double Gang Faceplate complete with four CE cat5e Data Modules, Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.
A Double Gang Faceplate complete with four CE cat6 Data Modules, Individual port labelling is also quick and easy with standard CE outlet slide in fields incorporated into the design. IDC Termination blocks are provided on the back of each module.
Category 6 UTP modules are standard 25x50mm Euromod size. Each shuttered module is supplied with an ID window and label.
The module is cased in a high quality ABS plastic and is suitable for mounting in a variety of plates and housings due to its low profile design.
Features
Standard 25x50mm Euromod Size
Low Profile Design
Supports Gigabit Ethernet
Backwards Compatible
Suitable for 22-26AWG stranded and solid wire, compatible with Krone punch down tool
The Cat6 transmission performance is in compliance with the ANSI/TIA/EIA 568 B.2-1 Standard
Please Note: These modules are designed to fit only into CE Faceplates found Here
Category 6 UTP modules are standard 6C size. Each shuttered module is supplied with an ID window and label.
The module is cased in a high quality ABS plastic and is suitable for mounting in a variety of plates and housings. The low profile design and its 6C size make this item ideal for floor box installations.
Features
Standard Euromod Size
Category 6
Low Profile Design
Backward Compatible
Supports Gigabit Ethernet
Suitable for 22-26AWG stranded and solid wire, compatible with Krone punch down tool
The Cat6 transmission performance is in compliance with the ANSI/TIA/EIA 568 B.2-1 Standard
Cat6 UTP Excel RJ45 Shuttered Module
Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon
Please Note: These modules are designed to fit only into Excel Faceplates found Here
Features
Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Low Profile Design
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position
Performance Overview
Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications.
Pre-assembled faceplates can be ordered to save installation time.
The Excel 3 in 1 module offers the ultimate in flexibility, space utilisation and ease of installation. The totally modular design allows the mounting of up to 3 shuttered RJ45 ports in a standard flat or bevelled single gang faceplate or up to 6 in a double gang fascia. The unique design means that you only load shuttered outlets as required, any capacity within the plate which is required for a later date is simply blanked off, providing a neat and easy to use completed installation. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.
Features
Category 6 compliant
High density design
Individual snap in modules
Fit standard Excel Faceplates (3 required for Single Faceplates, 6 required for Double Faceplates)
LSA compatible IDC
Individual port slide labelling system
Module dimensions 16.6(w) x 50(h) x 31.5(d) mm
Please Note: These modules are designed to fit only into Excel Faceplates found Here
Performance Overview
Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications.
As well as providing link and channel compliance - when installed with Excel category 6 components – with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.
Pre-assembled faceplates can be ordered to save installation time.
The Double Gang Bevelled Faceplates are constructed from ABS. Each faceplate is supplied with a set of mounting screws.
Dimensions 86x146.7x15mm
The Single Gang Bevelled Faceplates are constructed from ABS. Each faceplate is supplied with a set of mounting screws.
Dimensions 86x86x13mm
